November 17, 2026

Residential Epoxy Flooring in Houston: A Homeowner’s Guide

By: tx_epoxy

If you open up most garages around Houston the floor looks about the same. It’s gray concrete with an oil spot where the truck sits, and probably a crack or two that nobody can say when it showed up. People put up with it for years, which makes sense, it’s a garage. But then something comes up. Somebody wants a home gym out there, or a parent is moving in and all their boxes need to go somewhere that doesn’t look like a junk drawer, and that’s normally when people call us.

We do residential epoxy flooring for homeowners in Richmond, Houston and the areas around them, and we hear a lot of the same questions when we go out to look at a floor. So we thought we’d just write them down here.

So what is it, exactly?

Epoxy is a coating. It goes on wet and then hardens, and it sticks to the concrete that’s already there so we don’t have to tear anything up. When it’s finished there aren’t any seams, which means there’s nowhere for water or dirt to get into.

That ends up mattering a lot. Plain concrete is porous so it soaks up whatever gets spilled on it, oil, antifreeze, the red mud that comes off cleats after a ball game, and once it’s in there it doesn’t really come out. With a coated floor the spill stays on the surface and you can just wipe it up.

The garage is where most people start

Most of the floors we do are garages. That’s not surprising since the garage floor probably takes more abuse than any other floor in the house. You’ve got hot tires in the summer, tools getting dropped, bikes going in and out, and usually some kind of cooler leak after a holiday weekend.

A lot of people out in Fort Bend County use their garage as an extra room, and the coating helps it look like an actual room and not something half done. The first time you hose it out and it looks clean when it dries, you’ll see what we mean.

Basements, barns, sheds, and the rest of the house

There aren’t a lot of basements in this part of Texas but we do run into a few. The main thing those homeowners want to know about is water. Epoxy is resistant to moisture and water damage so it works well below grade, and it also makes a dark basement look a lot brighter.

Barns and sheds are different again. A lot of the properties west of town have bigger lots with outbuildings, and those floors get equipment, feed and plenty of mud on them. It’s a lot easier to rinse a sealed floor than to try to clean bare concrete, and the nonslip texture helps when it’s wet out there.

Inside the house it can go on just about any concrete slab. We get asked about laundry rooms and mudrooms quite a bit since those are the rooms where water and dirty shoes end up. If you’re thinking about a certain room and you’re not sure, ask us about it when we come out.

Picking a look

This is usually the part that takes people the longest to decide on, and a lot of them end up sending pictures back and forth with their husband or wife. All the options are on our epoxy floor colors page, but below is a short summary of each one.

Solid colors are the simplest choice. There’s tan, mocha, a couple of grays and a brick red. If you want a floor that’s clean looking and doesn’t draw attention, solid is a good way to go.

Blended flake is probably the most popular for garages. Small chips of color get spread over the coating while it’s still wet, and the chips come in small, medium and large. They do a good job of hiding dust, and that helps in a garage where the door is up for a lot of the day.

Brindle flake has more of a mix of tones in it. The color names are things like Basal, Ewa Green, Carbon and Pali Brown, and the result looks kind of earthy, closer to natural stone.

Then you have metallic. Some people really like it and some don’t, there’s not much in between. The color moves and swirls and picks up the light a little like molten rock does. A few of the shades are Mohave Sand, Rustic Sky, Antique Silver and Palapa. We’d call it more of a finish for living spaces than for a work floor, but some people put it in a garage they want to show off and it looks great there too.

It’s easier to see than to describe, so take a few minutes and look at our before and after photos. Most people have a pretty good idea what they want after that.

Houston weather and your floor

The weather here is hard on concrete. It’s humid most of the year, we get storms that drop inches of rain in a couple of hours, and a garage with the door shut in July gets really hot.

Epoxy holds up to that better than bare concrete. It resists moisture and handles the temperature extremes, and the nonslip surface is useful when somebody comes in from the rain with wet shoes. Cleaning it is easy too, usually just a wipe or a mop.

It isn’t going to last forever on its own though. How long a floor lasts has a lot to do with how the concrete was prepared and how the coating was put down. You can’t tell any of that by looking at it afterwards, so it’s worth being picky about who does the work.

What we’d ask if we were hiring someone

The first thing we’d ask about is prep work. Ask them what they plan to do with the cracks and stains that are already there and if any old paint or sealer has to be removed. If they can’t really explain it, we’d keep looking.

We’d also ask to see some floors they’ve done themselves. A local company should have photos of its own work.

And find out how long before you can park on it again, because you’ll need somewhere else for the car until then.

Getting in touch

We have three offices: Richmond on FM 1093, Harwin Drive and Hillmont Street. We work all over Fort Bend and Harris Counties. Our main number in Richmond is (832) 321-4747, Harwin is (832) 321-4855 and Hillmont is (832) 321-3034. Phones are answered Monday to Friday from 8 to 4.

If you’ve been thinking about doing something with your garage floor, send us a note for a free estimate and tell us what you plan to use the space for. We’ll get back to you from there.

Quick answers

Is epoxy a good idea for a Houston garage?

For most homes it is. It doesn’t have seams, it isn’t slippery, it handles moisture and it holds up in the heat. Garages are the bulk of what we do.

Can it go anywhere besides the garage?

Yes, it can go in basements, barns, sheds and most rooms that have a concrete floor. If you’re not sure about yours just ask us.

Which finish hides dirt?

Flake. The chips break up the surface so you don’t notice dust as much.

How do I keep it clean?

You can mop it or wipe it down. Spills don’t soak in, so they just stay on top.

Are estimates free?

Yes, they’re free. Call (832) 321-4747 or use the contact form.