There are several Katy TX concrete resurfacing options you can choose from. Whether it’s to change the look of your pool deck or repair the extensive surface-level damage of your driveway, resurfacing your concrete is an excellent option. There are several advantages to resurfacing your concrete other than just as decorative concrete.
Depending on the size of the area you want to resurface, this could be a do-it-yourself project or one for a contractor. You should assess that before moving forward. If you think you’ll be in way over your head, you should consult a professional so that they can analyze your options for you. Contact any of the experts with Epoxy Technology Coatings for an estimate about your concrete resurfacing options.
Reasons for a Katy TX Concrete Resurfacing Project
As mentioned earlier, there are a few reasons why you want to resurface your concrete. Repairing it to rid it of an unappealing look is the most apparent reason. If your pavement has holes and cracks, discoloration, or some spalling, resurfacing it can fix those issues. Resurfacing will help it last longer while also repairing the problems on the surface.
Add a decorative layer over your boring concrete flooring!
You can resurface any concrete surface. Whether it’s your driveway, patio, garage, or pool deck, you can resurface it. Whether in or outdoor, you can surely freshen up aging concrete and make it look new.
However, you may also want to give your concrete surface a fresh glow-up. Sometimes there may not be any issues that make your concrete unsightly.
It could just be that the conventional design several years ago doesn’t look as good anymore. Or perhaps the decorative patterns have worn away over the years, and you want to resurface them to renew the colors and design.
There are a variety of choices, whether you’re updating a design or completely changing it.
What goes into Concrete Resurfacing
Working with concrete is an endeavor. Anything could happen beneath the surface that you may not even be aware of. If you want to avoid mishaps, leave the job to a professional. Regardless, the process of resurfacing a concrete surface falls into a similar pattern.
As with any other flooring project, concrete resurfacing needs ample preparation. Before a contractor can begin, the area you want to resurface needs to be cleaned.
A high-intensity pressure washer will wash away dirt, oil, grease, and flaking concrete from the area. If there are any stubborn spots, experts may need to use a chemical solution. Stripping any coatings, sealer, or paint from the concrete comes next. This process is so the overlay will bind to the old concrete easier.
Once the area is clean, they’ll inspect the concrete. Contractors will then level down any minor spalling, scaling, or delamination to solid concrete. The contractors will also fill cracks and holes to keep them from mirroring through the overlay.
Sometimes, the contractors may roughen or profile the concrete surface so that the overlay can grip it better. They’ll use either a grinder or a shot-blaster, depending on the concrete’s condition. These machines will remove most contaminants and unsound concrete while also leaving behind a roughened surface profile.
Perhaps your concrete needs to go through some Katy TX Concrete Resurfacing.
After the prep work, they’ll get to laying the new layer, or rather, layers. These are usually polymer concrete mixes. Once the overlay dries, and you implement your design choices and finishes, your area of choice will have a fresh, new look.
What Concrete Resurfacing Can and Cannot Do
Katy TX concrete resurfacing can clean up tired-looking concrete flooring. However, you should judge if you should go through with it before deciding if that’s a viable option for you.
If your concrete has thin cracks or small holes, you may not need to resurface it. You can efficiently repair these minor damages before they get any worse. This method is also the easiest and cheapest solution.
Of course, if there is a hoard of these cracks and holes, the repairs may leave noticeable discoloration. At that point, if these repairs stack up in a single location or riddle the entire pavement in an obvious pattern, then resurfacing may be ideal.
On the other hand, resurfacing may not repair any significant damage to your concrete. If there are any structural issues with your concrete, resurfacing the concrete may not be possible.
If the concrete is heaving, damaged from winter freezes and thaw cycles, or has severe cracks, resurfacing may not fix it. Resurfacing your concrete will not mend any underlying soil problems.
At that point, you should be prepared to rip up your concrete slabs and get a contractor to lay down a new one. This method is the most costly option. However, you should do this if you don’t want the damage to continue increasing.
Choosing to Resurface Your Concrete
Perhaps you want to repair your concrete flooring without any extra embellishments. Or maybe, the original design was damaged, and you want to recreate it or change it. Resurfacing your concrete maybe your best option.
Hide the blemishes and strengthen your floors with a simple resurfacing.
There are several steps and choices to go through before you can resurface your concrete. If your flooring isn’t too damaged, then resurfacing it may be too big a job for a simple patch job. On the other hand, if your flooring is too damaged, you may opt to tear it up and set down a new one.
Resurfacing it is the middling option for damage too extensive for an easy patch up but too small to start over. Once you assess that your resurfacing your concrete is a viable option, you should consult a professional.
An expert knows how to work concrete best. If any issues pop up during the resurfacing process, they’ll be able to take care of it. You don’t need to worry about it, so long as they don’t run into any issues outside the range of the resurfacing job.
Contact the professionals with Epoxy Technology Coatings for all your concrete resurfacing options. They’ll be able to answer any questions regarding the Katy TX concrete resurfacing projects you have in mind.
Katy, TX Fun Facts:
- Katy’s main industry was rice but was also known for peanuts, cotton, and gas.
- Katy was once known as the rice capital of the world. There is an annual rice festival every fall.
- The city first held its continuing annual Rice Festival in 1981.
- For more fun facts, visit the official Katy community website.