Missouri City, TX industrial epoxy flooring is the perfect way to protect your floors from damage and wear. Epoxy will give your business a nice, finished look that is endlessly durable and easy to clean. If you’re considering industrial epoxy flooring for your business or commercial facility, be sure to check out Epoxy Technology Coatings.
Missouri City, TX industrial epoxy is a great material for industrial applications!
Although it is sometimes used in residential garages or patios, industrial use is where epoxy flooring really shines. Epoxy is a type of thermoset plastic that is known for its durability, impact resistance, and hardness. It is also resistant to many chemicals, including bleach, cleaners, oils, and greases.
Epoxy Technology Coatings has your back when you need epoxy flooring. We have been in business for over a decade, and in that time, we became the leading installer of epoxy floors in the Greater Houston Area. We have installed thousands of epoxy floors for our clients, and we are eager to do the same for you!
Get in touch with us for a free quote on our services. You can call us at our Richmond location, fill out our online form, or shoot us an email! Each epoxy floor we install is unique, and we are excited to see your space and provide the flooring solution you need.
Why Missouri City, TX Industrial Epoxy is the Perfect Fit for Your Business!
When it comes to flooring your business, there are a lot of options on the market. There are traditional options, such as tile or hardwood, and there are modern options, such as vinyl or laminate. But all of these have their drawbacks: some of these dirty quickly and are hard to clean. Many of them are also not chemically or heat resistant, which makes them a bad choice if you are looking to floor an industrial kitchen or garage.
Transform your business with Missouri City, TX industrial epoxy.
Enter epoxy flooring. Epoxy flooring is a type of flooring that is made from epoxy resin. Epoxy resin is a type of synthetic resin that is made from a mixture of two substances, one of which is a polymer. This mixture of chemicals will harden into a type of thermoset plastic, which is known for being extremely tough and able to take a lot of hits.
The two substances in epoxy are a resin and a hardener, which are generally referred to as Part A and Part B. When the resin and hardener are combined, mixed together, and allowed to harden, their molecular structure change and forms a bond that is resistant to both physical and chemical damage.
Missouri City, TX industrial epoxy floors are also very easy to clean. There are no special cleaners, treatments, or polishes that you need to apply on a regular basis; all you need to clean epoxy flooring is a vacuum and mop. This can save your business thousands of dollars in cleaning supplies every year!
How We Install Your Epoxy Flooring
Some of our clients are curious about how we install our epoxy flooring, but it really is quite a simple process. The hardest part is actually just waiting for the epoxy to cure and harden. Other than that, it’s a simple process that many could complete on their own. In fact, there are many DIY epoxy kits available on the market.
However, these kits come at a cost. Because of the limited access to technology and materials that are available to the average layman, these DIY kits are generally made of lower-quality ingredients. Plus, they are targeted for residential use, where far fewer people will be walking on these floors, and quality does not matter as much. For industrial flooring applications, you will want the reliability and experience of an expert installation.
Step 1: Prepping the Floor
Before the epoxy can be applied to the floor, the existing concrete floor needs to be cleaned to remove any old coatings or sealants. Homeowners who are using a DIY kit might accomplish this using an acid wash. However, the professionals at Epoxy Technology Coatings will use an industrial grinder with diamond grinding blocks to clean the concrete.
Step 2: Priming the Floor
After the concrete has been sufficiently cleaned off, it is time to lay down the mixture of epoxy resin and hardener. This layer of primer is spread out all over the floor using squeegees or rollers. Our crew at Epoxy Technology Coatings takes care to make sure this primer layer is as smooth as possible.
Step 3: Adding Colors
Now is the fun part! Epoxy Technology Coatings offers many different color options to spice up your flooring. Plus, the materials used can add traction to the floor.
Our floors can be made with a variety of color options.
With all the color selections we offer, there is sure to be something that is perfect for your business needs. Color options that Epoxy Technology Coatings offers include:
- Solid epoxy floor colors
- Blended flake epoxy floor coverings
- Brindle flake epoxy floor colors
- Metallic epoxy floor colors
The flakes we use are typically made out of vinyl, which is another type of plastic. While the primer is still sticky, our workers will throw the chips and allow them to fall at random over the primer layer. This gives each Missouri City, TX industrial epoxy floor we install a touch of uniqueness!
We will allow the primer to dry so that the chips can settle, and then our workers will go back and scoop up, sweep, and vacuum the excess chips to ensure an even texture.
Step 4: Sealing the Floor
Once the flakes and chips are all tidied up, it is time to seal the floor with a top layer of epoxy. This creates a smooth, chip-resistant finish to the floor and ensures that the flakes won’t break off. Now, you will need to let the epoxy cure for about a day to three days. Afterward, your flooring will be ready for business!
Epoxy Technology Coatings is excited to work with your commercial or industrial space! Contact our Richmond office today to learn more about our Missouri City, TX industrial epoxy floors.
Missouri City, TX Fun Facts:
- Although it was named after the state of Missouri, the first settlers were from Arlington.
- Many of the citizens are African American.
- This area is home to Houston’s “antennae farm”.